Beskrivning
Tekno RC MT410
1/10 4WD Electrisk Pro Monster Truck
Hvis du er interesseret i opgradering eller bare vil have den bedste og mest holdbare monster truck, så er MT410 for dig. Mange elektronik, dæk og karrosser fra populære monstertrucks passer direkte på.
Men hvorfor bruge tid på et high-end MT kit? Enkelt, der er altid plads til forbedringer, og i dette tilfælde, springet i ydelse og holdbarhed i forhold til, hvad markedet har i øjeblikket, er forbløffende. Vi bruger høj kvalitet CNC bearbejdede dele (chassis, shock towers, shock bodies, motor mount, hinge pin braces, etc.), som du simpelthen ikke finder på grundlæggende RTR MT’s.
Dele og opgraderinger er let tilgængelige fra hundredvis af forhandlere rundt om i verden. Mange af dem er sandsynligvis i din værktøjskasse allerede da MT410 deler dele med ET48, EB48 og andre populære Tekno RC biler.
Vær ikke bange for at bygge din egen MT; Instruktionerne er nemme at følge og vores kundeservice er i verdensklasse, hvis du har brug for lidt hjælp.
Du kan opgradere direkte fra Traxxas eRevo Brushless eller lignende monster truck. For eksempel eRevo Brushless elektronik, hjul/dæk passer direkte uden ændringer.
Specifikationer
Længde: 530mm
Akselafstand: 323-335mm
Bredde: 420mm
Vægt: ~3850g (8.3lb) out of the box RTR (RTR vægt udstyret m/ Tekin RX8, 2200kv truggy motor, 700g batteri, rx, etc)
Diff Ratio: F/R – 10/40t, Center – 44t
Batteri bakke dimensioner: 50x148mm
Kit/RTR: Kit
With the MT410, we are presenting a new standard of performance and value to customers without compromising on the great qualities that Tekno RC has established.
MT410 Features:
Thick 4mm CNC Aluminum Black Anodized Chassis
Easy to Build Kit with Detailed Instructions for All Skill Levels
Super Smooth Threaded 16mm Big Bore Shocks
Variety of Motor/Battery Configurations Accommodated
Wide Range of Body Styles and Wheels Accommodated
Best-in-class Durability and Wear
Lowest CG Available in Monster Truck Class
Many Aluminum Upgrades Throughout
Race Inspired Design and Dependability
All Metric Hex Hardware
This provides our customers with the best handling monster truck kit that also happens to be the best value on the market.
Full Feature List:
Chassis:
4mm CNC aluminum black anodized chassis.
Super narrow layout – widest point is only 125mm (less than 5”) mudguard-to-mudguard.
Class leading front and rear clearance (short chassis overhang) provides better bump handling and jump landing.
Adjustable, LCG lightweight body mounting system fits most popular MT bodies (Proline, JConcepts, etc.).
Lightweight, extremely durable front and rear bumper system.
Integrated battery tray/mud guard, battery is sunken into chassis for a super low CG.
Integrated electronics tray/mud guard for easy removal of electronics.
Spacious, enclosed, easy access radio box with integrated transponder mount.
Adjustable chassis brace system for fine tuning flex with front, center, and rear braces.
Motor Mount:
2-piece CNC aluminum motor mount with precision dual clamping gear mesh adjustment.
Split center diff mount for easy maintenance.
Lightweight direct-to-diff mount design.
Uses standard MOD 1 pinions.
Differentials and Drivetrain:
3 fluid filled adjustable super lightweight diffs.
Less rotating mass = better acceleration.
Lightweight straight center driveline for maximum efficiency and reduced wear.
CV driveshafts with captured pins on all 4 wheels.
Standard 17mm hexes fits most popular MT wheels.
Shocks:
16mm bore hard anodized shocks – Biggest-in-class!
4mm 7075 aluminum shock towers are standard.
Innovative conical piston design (not just tapered) provides varied compression and rebound rates.
Fully adjustable long travel suspension geometry maximizes stability and traction while soaking up any bumps and jumps.
CNC aluminum threaded shock bodies.
4mm hardened steel polished shafts.
Triple guide design for true consistent shaft action.
Options for vented cap, emulsion, or standard shock configurations out of the box.
Optional springs and sway bars available.
Suspension and Steering:
Bulletproof suspension arms – thicker and stronger than the competition.
Adjustable front arm sweep and angle to make the car more aggressive (swept forward), or easier to drive (swept back).
‘Narrow pivot’ steering posts provide ‘0 bump’ geometry with almost 0 steering slop.
Adjustable hinge pin braces are standard (toe, anti-squat, kick-up, front arm sweep).
4mm inner, 3.5mm outer hinge pins, polished for smooth action.
Adjustable Ackermann and bump-steer (bump in, 0 bump, bump out).
Steering system is fully supported on precision ball bearings. No bushings here.
Straight rod ends and lightweight turnbuckles.
Other Features:
Exceptional wear characteristics. Leave the slop and warping to the other guys.
Easily adjust anti-squat, rear toe, front arm angle, front arm sweep, roll center, toe, camber, wheelbase, Ackermann, bump steer, suspension geometry out of the box..
Extremely easy to work on with minimal screw count.
Shares many parts with our EB/NB/ET/NT48 = less parts in your toolbox.
All metric hex hardware.
100% Tekno RC Designed and Tested in Southern California.
Yderligere udstyr og dele du har brug for:
2 kanals sender/modtager
Monster truck karrosseri og maling (eller samme størrelse karrosseri)
1/8 ESC og motor system
Høj moment styre servo
4s (4 cell, 14.8v) LiPo batteri
1/8 Monster Truck dæk, hjul & CA lim (eller færdig monteret)
MOD1 Pinion 15 tænder – 25 tænder (TKR4175 – TKR4185)
Værktøj du skal bruge:
Umbraco 1.5mm (TKR1104), 2.0mm (TKR1105), 2.5mm (TKR1106)
Topskruetrækker 5.0mm (TKR1107, 5.5mm (TKR1108), 7.0mm (TKR1109)
17mm hjulnøgle
Hobby kniv
Spidstang
Støddæmper værktøj (TKR1115) eller svensk nøgle
4mm turnbuckle wrench (TKR1103) – 5.5/7.0 two sided wrench (TKR1119)
4mm arm reamer (or #19 drill bit)
Recensioner
Det finns inga recensioner än.